If you could not find comprehensive information on the cable assembly of Bitx3B/3C then you can now get
detailed information now.
We start of with the power connector assembly which is connected between the PA Board and the
Exciter.
The Power Connector is made up of 2 Nos of 4 PIN relimate connectors joined together,
The other modules like the Freq Counter / Audio Mute / AGC and a new option CW adapter can all be connected to the power assembly cable +12 Volts always on line. The brown wire is the 12 volts always on line.
Black Wire = Ground
Brown Wire = =12 V Always On
Orange Wire = RX line
Red Wire = TX Line
![]()
![]()
detailed information now.
We start of with the power connector assembly which is connected between the PA Board and the
Exciter.
The Power Connector is made up of 2 Nos of 4 PIN relimate connectors joined together,
The other modules like the Freq Counter / Audio Mute / AGC and a new option CW adapter can all be connected to the power assembly cable +12 Volts always on line. The brown wire is the 12 volts always on line.
Black Wire = Ground
Brown Wire = =12 V Always On
Orange Wire = RX line
Red Wire = TX Line
